Papst fan type 4412 F/2GP, PWM
Product id: papst4412f2gpManufact. ID.: 4412F/2GP
Measurements 120*120*25mm
air flow 100 CFM / 170 m³/h
4pin Molex connector with tacho-signal and PWM
Noise level: max. 43db(A)
|
|
Technical data |
|
Fan speed |
2,900 rpm |
|
Airflow m³/h |
170 m³/h |
|
Airflow CFM |
100 CFM |
|
Noise level db(A) |
43 db(A) |
|
Physical data |
|
|
Width |
120 mm |
|
Height |
25 mm |
|
Weight |
175 g |
|
Distance of mounting holes |
104.8 mm |
|
Diameter of mounting holes |
4.3 mm |
|
Electrical data |
|
|
Voltage |
12 V |
|
Power consumption |
6 W |
|
Length of power cord |
approx. 30 cm |
|
Connector |
4 pol. Mainboardstecker |
|
Other data |
|
|
Bearing type |
Sintec-Sleeve |
|
MTBF |
60000 Hours |
|
Thermo controlled |
no |
|
PWM controlled |
yes |
|
Tachometer signal |
yes |
|
|
Gerneral information The Papst fan 4412F2/GP is a PWM controlled 120mm fan manufactured by Papst. The Papst 4412F2/GP has a 4pin mainboard connector which is found on socket 775 and AM2 mainboards. The mainboard controlls the fan speed in relation to the CPU temperature automatically. The electronic of the Papst fan is designed to convert the PWM signal to a precise fan speed which can be adjusted in fine steps. Many common asian products can only convert the signal in coarse steps which results in unneccesary noise level. The given technical data is related to a 100% usage. Normally the controller of the board reduces the fan speed to a nearly noiseless level (depends on the heatsink which is important for the over all cooling performance - a bad heatsink can cause high fan speeds) |
